LED Grow Room Setup

LED Grow Room Setup

The indoor growth of plants is not as simple as many people think. The growth area preparation is one of the difficult tasks, and that is the base of indoor plant growth.

For indoor growth, we have to set up an LED grow room. LED grow room setup requires many criteria and many procedures to be adopted. Your grow room arrangement might be as simple and economical as feasible, or it can be as convenient and effective as possible.

The most admirable aspect is that you have complete control over everything from your lights to your growing media in your LED grow room. It is suitable for a new grower to plan before making any arrangements.

The best advice is to contact an expert before arranging your grow room, or at least you must have a tutorial to follow. We describe what you need to build up your own grow room below, with options ranging from simple to professionally outfitted.

Soon, you’ll be enjoying a fantastic grow room arrangement that is customized to your requirements and preferences. This article guides you to the best grow room setup in your space.

How to Setup LED Grow Room?

An LED grow room has many pieces of equipment and material in it. So, we describe everything steps by step.

1. Analyze Your Space

grow room

The first thing to consider in setting up your grow room is your space. Measure the dimensions of your space to give you an idea about your growth strategy. It can be as short as 1×1 and as long as 10×10 or more.

Analyze the distance of your space from the water source, which gives you an estimate of your water expenditure. Analyze the power source for your grow room because running fans and LED lights are necessary.

2. Light Reflective Surface

Don’t grow directly on carpeted flooring. They retain moisture and serve as a breeding ground for bugs and bacteria. You must lay down reflective sheets or plant them in a tent. A concrete, tile, or linoleum floor does not retain much moisture, which is a good choice.

We can apply flat white paint that reflects up to 85% lighting. Mylar reflects a greater amount of light, estimated to be 90%, and can be mounted on the walls and ceiling. Water is repelled by coating the floor with pond liners or rubber sheets. Cork flooring is costly, but it is generally fungal resistant.

3. Block Out Light Source

grow room with led grow lights

There are small openings from where light can enter the grow room. This light can interrupt the dark time of your plants. Hence, it is necessary to cover all those spots. Windows and other small openings must be covered with full reflective sheets. The shiner the reflective sheet, the more beneficial it will be an Orca and Reflex Diamond sheets are better to use.

4. Control Air Accumulation

The circulation of fresh air is also necessary for a grow room. Fresh air provides plants with essential oxygen and carbon dioxide, and as it circulates, it minimizes the danger of fungal diseases by lowering humidity.

grow room with air control

Carbon dioxide is so vital to photosynthesis that increasing the natural supply can result in exceptional plant growth. CO2 can be pumped into your grow room via a tank fitted with a regulator or an electrical generator specialized for the purpose.

Simple fans around the house can circulate air gently. However, extractor fans and a vent or two are required to remove stale air and introduce a new perspective. Setting up a fan to gently blow air on plants refills the CO2 around them and strengthens their stems in the continuous wind.

To bring a proper setup for air circulation, oscillating fans are best to fix on walls or roofs. Some people use remote control fans, and some use manual control fans. Both can be used.

5. Humidity Control Measures

Plants become receptive to mold and other fungi when humidity levels are too high, which can destroy your yield. A dehumidifier allows you to reduce moisture in the room quickly.

Measure the humidity using a hygrometer—50 percent is optimum for developing healthy, productive plants. Fans are also a good solution if you can’t afford a dehumidifier.

6. Heat Control Measures

Plants thrive in temperatures ranging from 65 to 75 degrees Fahrenheit. Cooler temperatures restrict growth; warmer temperatures harm plants and make them prone to illness. The incredible thing is that the ideal temperature range is similar to that of most houses.

On the other hand, high-intensity lighting generates a lot of heat and can boost the temperatures in your growing room. A separate cooling and heating system for your grow room allows complete temperature control at all moments, enabling you to lower the temperature while the lamps are on and raise it when they’re off.

Heat accumulation from the lights can be prevented by circulating fresh air. A growing chamber with a ceiling height greater than 6 feet allows heat to dissipate over the lamps.

All these things are not enough for the LED to grow room set up. We have to check some more areas.

7. Set up LED Grow Lights

Hanging grow lights above your plants produces a square or rectangular “footprint” of light. The footprint size will be decided by how bright the light is and how high it is mounted. Each lamp will have a distinct footprint, but if you use many grow lights, you will need to allow for some overlap. It would help if you also grasped the proper spacing between lights.

Grow lights must be separated by four feet. The lighting uniformity is the best of the three since it allows light to reach lower sections of the plants that would otherwise be dark. Generally, spacing your lights 4′ apart is a decent starting point, but variations in watt, size, and layout will decide what works.

Materials required for LED Grow Room Setup:

  • Seed Start Plugs
  • LED grow lights for indoor plants or any other grow light
  • Containers (earthen or plastic pots, fabric containers)
  • Grow Tents if required
  • Water Hose
  • Spray Bottle
  • Water Can
  • Timer
  • Thermo-Hygrometer
  • Spade
  • Soil or Potting Mix
  • Smoke Detector
  • Scissors
  • Pruners
  • Protective Glasses
  • PH Meter
  • Oscillating Fans
  • Intake Fans
  • Gloves
  • Exhaust Fans
  • Color/Reflective Coating
  • Carbon Filter

Procedure for Grow Room Setup

LED Grow Room Setup

Here is a complete procedure for LED grow room setup.

  • Analyze the area first by considering these factors in mind. Size, Flooring, Water and Electricity Source, Noise, Safety, and Privacy.
  • Make a complete floor setup after that. Some essential aspects in this step to consider are the pot quantity, plant quantity, space for walking, and place for racks. Place and arrange the water system if you do not want to apply water manually.
  • Building the grow room by creating inner walls, proper set up for ventilation and adequate space to adjust every piece of equipment. Walls must be reflective. You can set it up manually. But custom-made grow tents and designs are also available, which you can select by measuring your space.
  • There must be no light escape, so use Myler and White paints on your walls to make them reflective. White paint is budget-friendly, while Myler is expensive. Hence, you can choose according to your price range.
  • Choosing the grow lights. Grow light must be LED grow light because Fluorescent lights and HID are outdated now. A vital factor to consider in light is its spectrum. What spectrum is best for you? LED full spectrum lights are most efficient to use in a grow room and will give you maximum productivity. If someone cannot afford Full Spectrum LED grow lights, he can go for the Blue/Red Light spectrum, which is also good but a little less efficient than the full spectrum. LED lights are directional, and they do not scatter here and there.
  • After this, go for ventilation system set up. Ventilation is required to control the gas intake and release of plants. It is also necessary to control the room’s humidity and maintain a constant temperature. Hence, use oscillating fans, carbon filters, and Intake fans, exhaust fans wherever necessary, considering your space.
  • A heat control set up is also required to get enough output from your plants. Temperature monitoring involves the installation of monitors and sensors that will measure and monitor the heat of your grow room. It will assist you in keeping track of the fluctuations and what you need to do to control the temperature. Thermo-Hygrometers can measure both temperature and humidity. It is the most suitable alternative for indoor growers.
  • Every grower must consider that you must revisit the procedures properly once again to check if there is anything to change or repair. Keep a first aid box and fire safety system in the room in an emergency.
  • Your LED grow room is now fully set up, and you can start a plantation.

Conclusion

LED grow room is necessary if you want to grow indoor plants. LED grow room allows you to control everything yourself. You can maintain everything within minutes if you do the setup yourself. You can also hire experts I n this field for the setup. But, grow room provides you with surety about your products because you will get what you want. Hence, LED grow rooms are important to setup and are highly recommended.

Share your Profile: